Veröffentlichungen 2011

2011

Brylka, B., Fritzen, F., Böhlke, T., Weidenmann, K.A.:
Influence of micro-structure on fibre push-out tests.
PAMM • Proc. Appl. Math. Mech. 11, 141-142 (2011)
DOI: 10.1002/pamm.201110062

Drach, B., Tsukrov I., Piat, R., Dietrich, S.:
Material properties of anisotropic materials with pores.
PAMM • Proc. Appl. Math. Mech. 11, 507–508 (2011)
DOI: 10.1002/pamm.201110245

Drach, B., Tsukrov, I., Gross, T., Dietrich, S., Weidenmann, K., Piat, R., Böhlke, T.:
Numerical modeling of carbon/carbon composites with nanotextured matrix and 3D pores of irregular shapes.
International Journal of Solids and Structures, 48(18), 2447-2457 (2011)
DOI: 10.1016/j.ijsolstr.2011.04.021

Fritzen, F.:
Microstructural modeling and computational homogenization of the physically linear and nonlinear constitutive behavior of micro-heterogeneous materials.
Doctoral thesis, Schriftenreihe Kontinuumsmechanik im Maschinenbau Nr. 1, KIT Scientific Publishing, Karlsruhe (2011)
https://publikationen.bibliothek.kit.edu/1000023534

Fritzen, F., Böhlke, T.:
Nonlinear homogenization using the nonuniform transformation field analysis.
PAMM • Proc. Appl. Math. Mech. 11, 519-522 (2011)
DOI: 10.1002/pamm.201110250

Fritzen, F., Böhlke, T.:
Nonuniform transformation field analysis of materials with morphological anisotropy.
Composite Science and Technology 71, 433-442 (2011)

Fritzen, F., Böhlke, T.:
Periodic three-dimensional mesh generation for particle reinforced composites with application to metal matrix composites.
Int. J. Solids ‎Struct. 48, 706-718 (2011)

Fünfschilling, S., Fett, T., Hoffmann, M.J., Oberacker, R., Schwind, T., Wippler, J., Böhlke, T., Özcoban, H., Schneider, G.A., Becher, P.F., Kruzic, J.J.:
Mechanisms of toughening in silicon nitrides: The roles of crack bridging and microstructure.
Acta Materialia 59, 3978-3989 (2011)

Gross, T.S., Nguyen, K., Buck, M., Timoshchuk, N., Tsukrov, I., Reznik, B., Piat, R., Böhlke, T.:
Tension-compression anisotropy of in-plane elastic modulus for pyrolytic carbon.
Carbon; 49(6), 2145-2147 (2011)
DOI: 10.1016/j.carbon.2011.01.012

Jöchen, K., Böhlke, T.:
Qualitative study on texture evolution in rolled sheet metals using homogenization methods.
AIP Conf. Proc. 1353, 139-144 (2011)
DOI: 10.1063/1.3589505

Jöchen, K., Böhlke, T.:
Preprocessing of Texture Data for an Efficient Use in Homogenization Schemes.
Proc. 10th Int. Conf. Techn. Plast. (ICTP 2011), 848-853 (2011)

Lin, S., Böhlke, T, Langhoff, T.-A.:
Estimate of the Domain Orientation Distribution Function and the Thermoelastic Properties of Pyrolytic Carbon Based on an Image Processing Technique.
PAMM • Proc. Appl. Math. Mech. 11, 537-538 (2011)
DOI: 10.1002/pamm.201110258

Phan Van, T., Jöchen, K., Böhlke, T.:
Validation of Material Models in Grain Scale Simulation based on EBSD Experimental Data.
PAMM • Proc. Appl. Math. Mech. 11, 543-544 (2011)
DOI: 10.1002/pamm.201110261

Phan Van, T., Jöchen, K., Böhlke, T.:
Micromechanical Modeling of Metal Forming Operations.
The 14th International ESAFORM Conference on Material Forming
ESAFORM 2011, Volume 1353, 1215-1219 (2011)
DOI: 10.1063/1.3589682

Piat, R., Sinchuk, Y.:
Nonlinear homogenization of metal-ceramic composites with lamellar microstructure.
PAMM • Proc. Appl. Math. Mech. 11, 545-546 (2011)
DOI: 10.1002/pamm.201110262

Piat, R., Sinchuk, Y., Vasoya, M., Sigmund O.:
Minimal compliance design for metal-ceramic composites based structures.
Acta Materialia 59(12), 4835-4846 (2011)
DOI: 10.1016/j.actamat.2011.04.026

Roy, S., Gebert, J.-M., Stasiuk, G., Piat R., Weidenmann K. A., Wanner A.:
Complete determination of elastic moduli of interpenetrating metal/ceramic composites using ultrasonic techniques and micromechanical modelling.
Materials Science and Engineering: A 528(28), 8226-8235 (2011)
DOI: 10.1016/j.msea.2011.07.029

Sinchuk, Y., Piat, R., Roy, S., Gibmeier, J., Wanner, A.:
Inelastic behavior of the single domain of metal-ceramic composites with lamellar microstructure.
PAMM • Proc. Appl. Math. Mech. 11, 285-286 (2011)
DOI: 10.1002/pamm.201110134

Tsotsova, R.:
Texture-based modelling of anisotropic flow potentials.
Doctoral thesis, Schriftenreihe Kontinuumsmechanik im Maschinenbau Nr. 2, KIT Scientific Publishing, Karlsruhe (2011)
https://publikationen.bibliothek.kit.edu/1000024876

Wippler, J.:
Micromechanical finite element simulations of crack propagation in Silicon Nitride.
Doctoral thesis, Schriftenreihe Kontinuumsmechanik im Maschinenbau Nr. 3, KIT Scientific Publishing, Karlsruhe (2011)
https://publikationen.bibliothek.kit.edu/1000026004

Wippler, J., Böhlke, T.:
Delamination of Grain-Interfaces in Silicon Nitride.
PAMM • Proc. Appl. Math. Mech. 11, 183-184 (2011)
DOI: 10.1002/pamm.201110083

Wippler, J., Fünfschilling, S., Fritzen, F., Böhlke, T., Hoffmann, M.J.:
Homogenization of the thermoelastic properties of silicon nitride.
Acta Materialia 59, 6029-6038 (2011)
DOI:10.1016/j.actamat.2011.06.011

Wulfinghoff, S., Glavas, V., Böhlke, T.:
Dislocation Transport in Single Crystals and Dislocation-based Micromechanical Hardening.
PAMM • Proc. Appl. Math. Mech. 11, 449-450 (2011)
DOI: 10.1002/pamm.201110216

... nach oben